1. Product

        Coarse Powder Grinding Mill

        Capacity:10-100t/h

        Feeding size:≤80mm

        Output Size:≤3mm

        Coarse Powder Grinding Mill, is called European Version Coarse Hammer Crusher is engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into coarse powder and small particles, it is widely used in metallurgy, min

        Inquiry Contact

        Information

         

        Product of coarse powder grinding mill description:
        European Version Coarse Hammer Crusher is engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into coarse powder and small particles, it is widely used in metallurgy, mining, chemical, cement, coal, sand-making, coal gangue, construction, refractory materials and ceramic industries.
         
        Working principle of Coarse Powder Grinding Mill:
        European version coarse hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part, which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of turn plates, pin shafts, and hammers which are grouped regularly in the main shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers. Large materials entering the crusher through the feed inlet are firstly crushed by the high-speed hammers, and then thrown fiercely to the support iron for further crushing. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. To avoid the plugging of the crusher, th proportion of water for the crushing materials is no more than 20%.
         
        Advantage of coarse powder grinding mill:
        1.High capacity and low power consumption
        2.Uniform particle size with high crushing and crushing ratio;
        3.Simple structure;
        4.Easy operation; low investment.
         
        Specifications of coarse powder grinding mill:

        Type

        PC4008-75

        PC40012-90

        PC40015-132

         

         Rotor Diameter/mm

        750

        900

        1150

         

          Rotor Width/mm

        800

        1200

        1500

         

        Rotor Speed r/min

        800-1000

        800-1000

        550-800

         

        Feed head size/mm

        320*930

        400*1200

        500*1500

        Feeding Size/mm

        ≤50

        ≤60

        ≤80

        Finished Size/mm

        ≤3

        ≤3

        ≤8

        Capacity t/h

        10--30

        30--60

        50--100

        Powder/kw

        55-75

        75-90

        110-132

        Hammer Number (piece)

        18

        32

        32

        Overall Size L*W*H/mm

        2310*1665*1610

        2840*2100*2020

        3720*2650*2540

         Note: Any changes of technical data shall not be prior advised. 

         

        Feedback

        Recommend

        Ultrafine Grinding Mill

        Capacity:0.5-30 t/h
        Feeding size:≤20mm
        Output Size:5-74um/mesh
        Info:HGM Series ultrafine grinding mill is the equipment specializing in producing fine and superfine powder of non-inflammable...

          Contact us

        • Office Address: No.19Fuqing Rd,Shanghai
        • E-mail: Sales@clirik.com
        • Sales Department Tel 0086-21-20236178

        Copyright 2014 by Shanghai Clirik Machinery Co. LTD All rights reservedE-mail:sales@clirik.com

        一级做爱片