1. Product

        Hammer Crusher

        Capacity:3-45t/h

        Feeding size:<350

        Output Size:0-22

        Hammer crusher is equipment using high-speed rotary hammers to crush materials, mainly applied to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics. It can crush hard and soft ores into medium or smal

        Inquiry Contact

        Information

         

        Advantages and Features of hammer crusher :

        1.high capacity, high crushing ratio
        2.uniform particle size, simple structure
        3.Low investment, easy management and maintenance.
         
        Working principle of hammer crusher:
        Hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.
         
        Main Specification of hammer crusher :
         

        Type

        PC400x300

        PC600x400

        PC800x600

        Rotor Diameter /mm

        400

        600

        800

        Rotor Width/ mm

        300

        400

        600

        Rotor Speed/  r/min

        1100

        1000

        900

        Max Feeding Size/mm

        <100

        <220

        <350

        Finished particle size /mm

        0-10

        0-20

        0-22

        Capacity / t/h

        3-8

        8-15

        15-45

        Power /kw

        11

        18.5-22

        45

        Hammer Number /pieces

        12-16

        12-20

        20-28

        Dimension L*W*H/mm

        855*795*860

        1150*1095*1230

        2360*1490*1415

         

         

        Feedback

        Recommend

        Ultrafine Grinding Mill

        Capacity:0.5-30 t/h
        Feeding size:≤20mm
        Output Size:5-74um/mesh
        Info:HGM Series ultrafine grinding mill is the equipment specializing in producing fine and superfine powder of non-inflammable...

          Contact us

        • Office Address: No.19Fuqing Rd,Shanghai
        • E-mail: Sales@clirik.com
        • Sales Department Tel 0086-21-20236178

        Copyright 2014 by Shanghai Clirik Machinery Co. LTD All rights reservedE-mail:sales@clirik.com

        一级做爱片